top of page
Piranha P-90 (P-110) Ironworker

Piranha P-90 (P-110) Ironworker

Piranha P-110 Ironworker. 460V 3PH, and can be switched to 230V if necessary.

 

  • The P-110 hydraulic ironworker has more standard workstations than any other ironworker machine in its class. This includes punching, bending, bar shear, angle shear, round bar shear, and an integrated coper/notcher.
  • The P-110 has a dovetail slide that allows an operator to switch from punching to bending in just a few seconds
  • The P-110 has full electrical control of its stroke with a foot switch and limit switch stroke controls.
  • The no slug-loss shearing saves material, keeps the machine area cleaner, and offers larger material capacity than the competition. A wide variety of optional tooling is available to enhance the P-110’s capabilities.
  • Piranha’s incomparable integrated coper/notcher station outperforms any other ironworker machine. Notch from thick to thin, remove the full leg from angle iron, shave even the smallest piece from the end of the work piece, and maintain total control of the part – from any angle.

 

  • PRODUCT INFO

    • Throat Depth - 12"
    • Open Height - 15-1/2"
    • Closed Height w/o Die Block - 10-1/4"
    • Stroke Length - 5-1/4"
    • Platen Table Size - 14-1/2" x 21"
    • Punch Hole Size(Max. Material) Max. Hole Size (Material) - 110 Tons 1-7/16" (1") 5" (1/4")
    • Plate Shear - 20-1/2" Long 1" x12" or 3/4" x 18" or 1/2" x 20"
    • Angle Shear - 6" x 6" x 5/8"
    • Bar Shear Round (min. to max.) Square (min. to max.) - 1/2" to 2" or 1/2" to 1-3/8"
    • Coper-Notcher (Max.) - 95 Tons 4" x 6" x 3/8"
    • Punch End - Strokes Per Minute - 30 @ 3/4"
    • Work Station Height Approx. - 44"
    • Hyd Pump Volume and System PSI - 10.5 GPM 3200 PSI
    • Fluid Capacity - 25 Gallons
    • Motor - 20 HP 3 Ph.
    • Dimensions(LxWxH) - 90" x 35" x 66-1/2"
    • Weight(Approx.) - 5800 lbs
$17,950.00Price
bottom of page